INSTRUCTION MANUAL

ROLEE POLEE HANDHELD TRACKBALL
Model No: MSFT-BKU

1. USB Models (most Rolee Polee mice are USB): The end of the USB cable is a thin rectangle. Plug the USB cable into any available USB port. The operating system will automatically detect the Rolee Polee and install the appropriate drivers.

2. PS/2 Models: The end of the PS/2 cable is round. Plug the PS/2 cable into the round PS/2 mouse port. Reboot (restart) your computer. As the computer restarts, it will automatically detect the Rolee Polee and install the appropriate drivers.

3. Using your new Rolee Polee: The Rolee Polee works just like a standard mouse with the following exception. The trackball has 2 modes (mouse mode & scroll mode). To toggle between mouse mode and toggle mode press the “Scroll Mode Toggle Button” (see photo above). When in “mouse mode” the trackball acts like a mouse. When in “scroll mode” the trackball acts like a scroll wheel.

The Mouse Buttons

Button Number 1: This is the scroll mode/mouse mode toggle button. Most people think this is a standard "Left" mouse button, but it is not. It is a special toggle button that lets you switch between mouse mode and toggle mode. In Mouse Mode the trackball functions like a standard computer mouse moving the cursor around the screen. In Scroll Mode the trackball functions like a scroll button that lets you scroll up and down through web pages or other computer documents.

Button Number 2: This is a standard "right" mouse button. When you press this button it will open a little pop window with various menu options depending on what program you are running when you press this button.

4. Cleaning your Rolee Polee: Stick a paper clip into one of the holes in the trackball ring (see photo above) and rotate counter-clockwise. Remove the trackball and you will notice that there are little rollers that rest against the trackball when it is in place. Take a lint free cloth and wipe both the trackball and the little trackball rollers.